Molded Rubber Gaskets for The Waterworks Industry

If you don’t see what you’re looking for, please contact us directly at 800-633-3415!

Barracuda® Restrained Joint (RJ) Gaskets

STATS
  • Licensed TYTON® Joint Manufacturer
  • Barracuda® RJ gaskets are molded in SAFETY ORANGE in EPDM, SBR, and Nitrile
  • SAFETY ORANGE compound allows visual confirmation that a restrained joint gasket is installed
  • Rated up to 350 PSI and fully warranted by Specification Rubber
  • In stock for immediate shipment
  • Gaskets available in 4" - 16"
  • Manufactured in accordance with ANSI/AWWA C111/A21.11 Rubber Gasket Joints for Ductile Iron Pressure Pipe and Fittings
  • NSF Certified/ UL compliant
  • Made in the USA
  • Suitable for water, wastewater, and other related applications
Tyton Joint® and Tyton® are registered trademarks and properties of United States Pipe and Foundry Company, LLC (US Pipe). Neither Barracuda® nor Specification Rubber Products are affiliated with US Pipe.
More Information

EPDM Sheet Rubber Material

STATS
  • NSF-61 Certified
  • Formulated to meet or exceed ANSI/AWWA C111/A21.11 compound requirements
  • EPDM Elastomer sulfur cured 75 Shore A Black, Smooth Finished
  • Branded “EPDM NSF-61 Made in USA” for ease of identification
  • 1/16”, 1/8”, 1/4” and 1/2” thicknesses available
  • Sold by the linear foot or in roll lengths
  • Stocked and ready for immediate shipment
  • Produced in the USA under a stringent ISO quality system
More Information

Filler Flange Gaskets

STATS
  • Stocked in 3”- 12"
  • Available up to 36" in one solid piece - larger sizes available (4 segment/dovetailed)
  • Full Face and Ring Style
  • NSF-61 EPDM
  • 1/16”, 1/8”, 1/4” and 1/2” thicknesses
  • 250 psi • Up to three gaskets can be stacked to fill 1 1/2”
More Information

Mechanical Joint (MJ) Gaskets

STATS
  • Stocked in 3”-48”
  • Larger sizes available upon request
  • Available in NSF-61 SBR, EDPM, Nitrile and FKM
  • Neoprene also available
More Information

Mechanical Joint Transition Gaskets

STATS
  • Stocked in 2”- 12”
  • Larger sizes available upon request
  • Available in NSF-61 SBR, EPDM, Nitrile and FKM
  • Neoprene also available
  • MJ x SDR35 available upon request
More Information

MeterSeal™ EPDM Rubber Gaskets

STATS
  • 200 psi
  • Molded bulb on ID improves sealing with mismatched faces and uneven torque on bolts
  • MeterSeal™ oval and tabbed available in 1 1/2" & 2” ID
  • Available in NSF-61 SBR, Nitrile and FKM
  • Neoprene also available
More Information

NSF-61 Flat Gaskets

STATS
  • Full Face and Ring Style
  • NSF-61 EPDM
  • Stocked in 3”- 12″
  • Available up to 36″ in one solid piece – larger sizes available (4 segment/dovetailed)
  • 1/8” thickness (see Filler Flange gaskets for additional options)
  • Designed for use with standard flange bolts
  • Holes can be cut to match any bolt configuration
  • Manufactured in the USA under strict quality control procedures governed by ISO 9001:2015
Click here to find out why Specification Rubber Products EDPM Flat Gaskets are superior to traditional red rubber gaskets.  
More Information

Nut & Bolt Kits

STATS
  • 2”- 64” available upon request
  • Domestic and Import
  • Aluminum, Stainless Steel and Zinc coatings available. For other options, please call for more info.
Submittal and Spec sheets are available upon request
More Information

Toruseal® Rubber Gaskets

STATS
  • Available in 2” - 64”
  • 1/8” thickness, 150# bolt pattern with dual raised torus bulbs
  • 250-350 psi rated working pressure
  • Available in NSF-61 SBR, EPDM, Nitrile and FKM
  • Neoprene also available
More Information

Tyton® Rubber Gaskets

STATS
  • Available in 3" - 48"
  • Available in NSF-61 SBR, EPDM, Nitrile and FKM
  • Neoprene also available
More Information

Water Meter Gaskets

STATS
  • Standard water meter gaskets are available in EPDM.
  • All standard EPDM water meter gaskets are NSF-61 certified.
  • Water Meter gaskets are rated up to 150 PSI.
  • Water Meter gaskets are currently stocked in 1 1/2" and  2” ID. Other sizes available upon request.
  • Available in 1/16", 1/8", 1/4" and 1/2" thickness
  • Drop-in water meter gaskets have a patented tab to assist with installation.
  • Water Meter gaskets meet the physical properties specified in table 4 of ANSI/AWWA C111/A21.11.
  • All water meter gaskets are manufactured in the U.S.A.
  • NSF Certified/ UL compliant
More Information

Web Development By Infomedia

Top